Specification:

Condition: Brand new
Package includes: 1x Daytime running light controller
Input voltage: DC12V-14.8V
Output power: Max. 16W

Features:
Come with safety fuse with the anode wire.
Easy wiring, please follow the diagram on the back of controller.
Great add on item for controlling headlamp, DRL or side lights.
Allow you to connect your DRL lights so that when you start the car the lights turn on and then when you turn you headlights on the DRL will turn off!
Complies with EU regulations as the DRL are designed for daytime use only.

Please Read All Description Before Ordering the Product.

*Notice: please note that normally it will take 7-14 days for our customers to receive the package.

General Product Description
1). 50A 12/24V Regulator
2).CE RoHS approved
3).temperature sensor outside
4). LCD display

1. Product Introduction
CM series controller is a kind of intelligent, multi-purpose solar charge and discharge controller. The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet your various application requirements. CM series controller has following features:
– Image of LCD graphic symbol
– Simple button operation
– Automatic Identification System Voltage level
– Intelligent PWM charge mode
– Automatic Temperature Compensation
– Adjustable charge-discharge control parameters
– Settable Operating mode of Load
– Accumulated function of charge and discharge Ampere hours
– Remote monitoring and control function (custom)
– Battery reverse-discharge protection
– Battery Low Voltage Disconnection (LVD)
– Battery reverse connection protection
– Overload, Short Circuit Protection

The 40Amp MPPT Charge Controller has MPPT technology, or Maximum Power Point Tracking technology. This controller has peak conversion efficiency of 97%, High Tracking efficiency is 99%. This controller has quick tracking speed and 4 Stage charge with PWM output. There is also a nature convection cooling system. Can be used with Sealed, Gel, and Flooded battery. This controller can automatically recognize day and night.

Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.

This controller can charge and discharge at the same time. It has perfect SOC function, control charge current, and supply power to the loads.

Features:

Always keep the battery on fill voltage condition.

Prevent the battery from over-charging.

Prevent the battery from over-discharging.

Prevent the battery from reverse charging to solar panels during nights.

Reverse Polarity Protection for Battery

Reverse Polarity Protection for Solar Panels

When the battery voltage is low, the controller will automatically cut off the load from the system.

If the voltage of battery is back to normal and the load will restart working.

Thunder protection

According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage.

(The parameter is default under 25℃ condition, locked by the CPU procedure, cannot adjust.)

The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.

Specification:

Rated charge current: 10A, 30A

Rated load current: 10A, 30A

Work voltage: 12V/24V AUTO

Voltage of stop power supply: 10.8V or 21.6V

Voltage of resume power supply: 12.6V or 25.2V

Voltage of stop charging: 14.4V or 28.8V

Temperature coefficient of voltage stop charge: -3mV/℃ cell

Working temperature: -20℃~+60℃

Package includes:

1 x Solar Charge Controller

1 x English user’s manual

Automatic three-stage battery charging maintains your battery’s life with three nominal voltage output models: 13.2 Vdc range “float” mode, 13.6 Vdc range “absorption mode, 14.4 Vdc range”bulk” mode

Bioenno Power 12V/24V, 30A Solar Controller (Model SC-122430T) is a versatile controller for solar systems, that can charge LiFePO4 (Lithium Iron Phosphate) Batteries! This solar controller accepts either 12V/24V input from solar panels and can handle up to 30 Amps

Technical Specifications
System Voltage: 12V or 24V (automatic detection)
Allowable Range for Input Voltage (from solar panels): 0V to 50V
Output Voltage to Batteries: LiFePO4: 12V or 24V
Output Voltage to Loads: 12V or 24V (depending on battery configuration)
Rated Charge Current (Current Delivered to Battery): Up to 30A
Rated Load Current: Up to 30A
Batteries Compatible w/ Controller: Lithium Iron Phosphate (LiFePO4)

Compatible 12V Lithium Iron Phosphate Batteries

Nominal Voltage: 12.8V
Over Charge Voltage: 14.6V
High Recovery Voltage: 13.6V
Saturation Voltage: 12V to 13.6V
Low Discharge Voltage: 10.8V
Low Recover Voltage: 12V

Compatible 24V Lithium Iron Phosphate Batteries

Nominal Voltage: 25.6V
Over Charge Voltage: 29.2V
High Recovery Voltage: 27.2V
Saturation Voltage: 24V to 27.2V
Low Discharge Voltage: 21.6V
Low Recover voltage: 24V

Returns

Buyers have 30 days from the date of delivery to request a return through Amazon. Buyer pays return shipping and is responsible for compliance with shipping regulation.

Warranty

Bioenno Power and Bioenno Tech LLC warrants only to the original purchaser of this product that this product is free of defects in material and workmanship for 6 months from time of purchase.

The Renewable Energy Science Education Set is a modular experiment set designed to demonstrate the workings of a complete clean energy technology system on a miniature scale. With this kit, an entire miniature renewable energy system can be constructed on a lab-scale. This set includes a wind turbine kit, a solar photovoltaic panel, an electrolyzer, a PEM fuel cell, and hydrogen storage system encouraging users to learn the system step by step, configure the system in different ways, and visualize the workings of clean energy principles from start to finish.

The Sunforce 650 Watt Pure Sine Wave Inverter converts 12 Volt DC power into household AC power. Excellent for powering home appliances directly from your 12V battery, this inverter will supply stable power to run small electronic tools, air pumps, electronic doors, small motors and refrigerators that a modified sine wave inverter cannot. Pure Sine Wave inverters provide clean power with very low harmonic distortion, no static or humming noise. Safety features include high and low voltage protection, overload protection and overtemperature protection. This unit comes with an ON/OFF power switch, an LED status indicator and two 110 V AC outlets.

The Sunforce 60022 30 Amp Solar Charge Controller prevents overcharging of 12 Volt batteries. It is intended for use with 12 Volt solar panels, and can handle up to 30 amps of array current and up to 450 Watts of solar power. The 60022 will provide maintenance free protection of your solar panel and batteries. The controller will automatically indicate the charged state of your battery on the LED status indicators. The 60022 is designed to work with a variety of 12 Volt solar panels.

Morningstar Solar Controller Morningstar’s SHS controller was specifically designed to meet the needs of rural solar home systems in developing countries. This controller provides many features and benefits not available on other controllers. It is ideal for rural electrification systems with one to three solar panels. This controller is not sold in the USA or Canada. Specifications: Solar Current: 6A / 100 Watts Load Current: 6A / 100 Watts System Voltage: 12V Low Voltage Disconnect: 11.5V Low Voltage Reconnect: 12.6V Features: Low Cost High Reliability – Has a low failure rate and will last a long time Complete Electronic Protections – Has built-in electronic fuses that do not require replacement. Any wiring mistakes during installation will not damage controller Tropicalization – Protected with a moisture-tight coating, minimizing damage from humidity and nesting insects Easy to Use – Fully automatic and requires no adjustments or user selections Provides Controller and Battery Information – Has LED Indicators Better Battery Charging High Quality Automated Production Meets International Testing Standards Multi-language Documentation SpecificationsBrand: Morningstar   Output Voltage: 12V   Length: 5.9″   Height: 1.4″   Width: 2.6″   Warranty Life: 5yrs